ProScale 950 Series

The Series 950 Readout can be used with all 950 series ProScale systems previously sold by Mitutoyo America.
The INPUT connector of this readout accepts a 10 pin ABS Encoder (part# 701-1500-M80).

Standard Features:

• 10 Pin INPUT and OUTPUT connections. (Digimatic)

• Large, easy-to-read characters on a .75 in (20mm) LCD.

• Operates on 2 AA Energizer 1.5v Lithium batteries.

• Displays decimal inches, fractions (1/16, 1/32,1/64), millimeters, or centimeters

• Repeatability: .001in or .01mm or .001cm

• Range:± 999.999 in;  ± 399 63/64 in;  ± 9999.99 mm;  ± 999.999 cm

• Front panel keys for Power, Display Mode, Datum, Plus/Minus Offsets.

• Easy Flush mounting from behind or through case.

• ABS/INC Key enables measurements in absolute or incremental (relative) modes.

• SEND Key sends the currently displayed reading to the 10 pin SPC  output.

• F1-4 Keys are multifunctional user programmable keys.

• Compatible with most Accurate Technology wired or wireless Data Acquisition systems & Accessories

Additional User Programmable Features:

• Resolution:
  • .0005 to .1 Inch
    .01 to .1 mm
    .001 to .1 cm
    1/16 to 1/64 fraction
• Metric units displayed: mm or cm
• Display Fractions: Enabled or Disabled
• Datum (zero) key value
• Linear Scaling Factor
• Auto Power Off Timing
• Key and Programming Lock-Out
• Offset addition
• Upper/Lower limits
• Go/NoGo
• Position Monitoring
• Statistics
• Non-Linear Scaling
• Temperature Compensation

Works With ProScale Models:

                    
      150                                             250                  

Specifications:

• Accurate Technology Part Number:          700-1600-M50  
• Current Price:                                       $240        
• Current Firmware version:                       3.xxxC
• Physical Size (In Inches):                       4.5 x 3.5 x 1.5
• Power:                                                2AA Lithium Batteries
• Operation Manual                                  (Effective 5-5-2011)