General Purpose Digital Readout

Standard Features:

• Large, easy-to-read characters on a .75 in (20mm) LCD.

• 1 CR123 Lithium battery operation (up to 8 months) OR 12-24 VDC.

• Displays decimal inches, fractions (1/16, 1/32,1/64), millimeters, or centimeters

• Repeatability: .001in or .01mm or .001cm

• Range:± 999.999 in;  ± 399 63/64 in;  ± 9999.99 mm;  ± 999.999 cm

• Front panel keys for Power, Display Mode, Datum, Plus/Minus Offsets.

• Easy Flush mounting from behind or through case.

• ABS/INC Key enables measurements in absolute or incremental (relative) modes.

• SEND Key sends the currently displayed reading to the 10 pin SPC (Digimatic®) jack.

• F1-4 Keys are multifunctional user programmable keys.

• Compatible with wired or wireless data output Data Acquisition & Accessories

Additional User Programmable Features:

• Resolution:
  • .0005 to .1 Inch
    .01 to .1 mm
    .001 to .1 cm
    1/16 to 1/64 fraction
• Metric units displayed: mm or cm
• Display Fractions: Enabled or Disabled
• Datum (zero) key value
• Linear Scaling Factor
• Auto Power Off Timing
• Key and Programming Lock-Out
• Offset addition
• Upper/Lower limits
• Go/NoGo
• Position Monitoring
• Statistics
• Drift/Limits/monitor signal output
• Non-Linear Scaling (part # 700-1600-236 ONLY)
• Temperature Compensation  (part # 700-1600-236 ONLY)

Works With ProScale Models:

   
      150/150G      180                250 /250G         280                380                     580

Specifications:

• Current Part Number:          700-1600-235                          700-1600-236
• Operating Power                1 CR123 Battery or 12-24VDC      1 CR123 Battery
• Current Price:                    USD $220                                $260
• Current Firmware version:    3.1xxx                                     3.1xxC
• Physical Size (In Inches):    4.5 x 3.5 x 1.5                          4.5 x 3.5 x 1.5
• CAD Drawings
• Operation Manual