The Panel Mount Readout can be used with all of our measuring systems, except incremental models. 
(Current models use firmware version 3.030 or higher.)

This readout is powered by a CR123 lithium battery (typical battery life is 12 months).  SPC output, Limits output (N.O. or N.C.), and Position Monitoring output are standard.

Features:

	Can display in decimal metric, inches, and fractions (1/16ths, 1/32nds, or 1/64ths)
	Easy Operation: Front panel settings for Power, Units Selection, Zero, and Plus & Minus Offsets.
	SPC (position) data may be sent using the 10-pin plug on the readout's back side.  (Data transmission for this readout model must be initiated by the receiving device.) Also used for connecting any of our interface products.
	A low battery indicator appears when battery replacement is needed.

User Programmable Settings Include:

	Readout Direction Control
	Enable/Disable Calibration
	Selectable Resolution
	Metric units: mm or cm
	Enable/Disable Fractional readout
	Scaling Factor (linear multiplier)
	Power Off Timing

Related Links

Panel Mount Display Specifications

ProScale Model 180

ProScale Model 280

ProScale Model 380

Download A User Manual for this readout