ProScale Model 150 - www.proscale.com

ProScale Model 150 Measuring System

ProScale Model 150 shown with Encoder and Connector Link*

The ProScale Model 150 is an Absolute technology measuring system that is ideal for machinery applications or any measuring environment where the need to always remember its position is important.

Features:

Set and Forget: With Model 150, calibration settings are not lost due to power or signal interruption. The Model 150 will remember its place even when you change the batteries.
High Noise Immunity: With ProScale Absolute technology, the likelihood of motor electrical noise, magnetic fields, or power transients affecting the measurement accuracy or signal integrity is rare.
Scalability: The Model 150 supports multiple Encoders and Readouts operating simultaneously on the same Scale.
One year warranty for defects in workmanship.

Model 150 Specifications:

Accuracy (at encoder output): + .002in/ft (.17mm/m); + .008in.(.20mm)max error
Temperature Co-efficient: 25ppm/°C (from 20° to 100° C)
Model 150-10: Measurements up to 10 inches (250mm)
Model 150-18: Measurements up to 18 inches (400mm)
Installation Manual

* The connector link shown above is used to mount and move the SCALE.
Systems can be configured with any of the Readouts and Encoder cable lengths shown below.

Five Digital Readout models are available for the Model 150 systems.

$Large, easy-to-read characters on a .75 in (20mm) LCD 2 AA Alkaline battery operation Display inches, fractions mm, or cm Repeatability: .001in or .01mm. Range:± 999.999 in; ± 399 63/64 in; ± 9999.99 mm Front panel keys for Power, Units, Datum, Plus/Minus Easy Flush mounting from behind or through case.$ $Large, easy-to-read characters on a .75 in (20mm) LCD 2 AA battery or 24VDC operation Display inches, fractions mm, or cm Repeatability: .001in or .01mm. Range:± 999.999 in; ± 399 63/64 in; ± 9999.99 mm Front panel keys for Power, Units, Datum, Plus/Minus Easy Flush mounting from behind or through case. Non-Linear and Temperature compensation Up/Low limit, Go/NoGo$ $Large, easy-to-read characters on a .75 in (20mm) LCD 1 LIO battery or 24 VDC operation Display inches, fractions mm, or cm Repeatability: .001in or .01mm. Range:± 999.999 in; ± 399 63/64 in; ± 9999.99 mm Front panel keys for Power, Units, Datum, Plus/Minus Easy Panel mounting 1/4 DIN opening$ $Two separate inputs Easy-to-read backlit LCD characters 24 VDC operation Display inches, fractions mm, or cm Repeatability: .001in or .01mm. Range:± 999.999 in; ± 9999.99 mm Front panel keys for Power, Units, Datum, Plus/Minus RS232 & SPC Outputs$
Basic General Purpose Panel Mount LED Dual Input

ProScale Model 150/250 ABSolute Encoder (Readhead)

The Standard Absolute Encoder cable length is 120 inches (3m)
Other available lengths are: 12, 24, and 72 inches (300, 600, 1800mm)

	Accurate Technology - ProScale®
	American Made Linear Measuring Products