Set and Forget: With Model 350, calibration settings are not lost due to power interruption.  The absolute technology will remember its place even when you change the batteries.  (Model 350 will not lose its position as long as the digital display is powered when their is motion of the readhead.)

Dual Measurements: With absolute technology you can measure or position your system in absolute mode, switch to incremental mode for relative measurements, and return to the absolute mode with no loss of measurement or accuracy.  (Not available on all displays.)

Easy Operation: Front panel settings for Zero, Plus & Minus Offsets, Data Hold, Data Send, Programming and Units Mode.

Choice of Measurement Mode: Digital Displays will display readings in Millimeters, Centimeters, Decimal inches or Fractions.  (Fractions can be displayed in 16ths, 32nds, or 64ths.)

Output Choices: With SPC output you can plug in your favorite SPC data collection system and log readings as you see them on the display.  (Output in decimal form only.)  The output can be easily converted to RS232 using a GageWay.

High Noise Immunity: With ProScale Absolute technology, the likelihood of motor electrical noise, magnetic fields, or power transients affecting the measurement accuracy is greatly reduced.

Two year warranty for defects in workmanship.

A digital scale with a 60 inch measuring range.  Custom scale lengths may be ordered up to 60in.

A hi-speed encoder with a 72 inch cable.  Custom cable lengths may be ordered up to 72 inches.

A digital readout with non-linear error correction capability.

A guide clip (used to move the readhead).

Instruction manual.