Set and Forget: With Model X, calibration settings are not lost due to power interruption.  The absolute technology will remember its place even when you change the batteries.

Dual Measurements: Measure or position in absolute mode, switch to incremental mode for relative measurements, and return to the absolute mode with no loss of measurement or accuracy.

Advanced Operations: Add or subtract one reading from the other.  When the scales are installed at 90 degrees to each other, calculate the interior angle find arc/hole center points, arc lengths, and arc/hole radius.

Easy Operation: Front panel settings for Zero, Plus & Minus Offsets, Data Hold, Data Send, Units Mode, and Print (supports serial printers).

Choice of Measurement Mode: Digital Displays will display readings in Millimeters, Centimeters, Decimal inches or Fractions.  Fractions can be displayed in 16ths, 32nds, or 64ths.)

24VDC input and Panel Mount display give a fully integrated appearance to your installation

Output Choices: With SPC output you can plug in your favorite SPC data collection system and log readings as you see them on the display.  Also has built-in RS232 output.

Interfaces: With our available interfaces, ProScales can be used in a variety of systems and applications.

High Noise Immunity: With ProScale Absolute technology, the likelihood of motor electrical noise, magnetic fields, or power transients affecting the measurement accuracy is greatly reduced.

One year warranty for defects in workmanship.

Two digital scales up to 240 inches measuring range.

Two encoders (position sensor) with 10 feet cable lengths.  Custom cable lengths may be ordered up to 20 feet long.

One Dual Input Display.

Two clips or links (used for safely attaching to your apparatus).

An instruction manual.