Purchase

Configure & Purchase a ProScale Model 150

Measuring Ranges and System Power

Measuring Range

System Power*

Price (Scale & Encoder)

10 in (250 mm)

Battery

$ 220

10 in (250 mm)

Battery

$ 230

18 in (450 mm)

12-24 VDC

$ 250

18 in (450 mm)

12-24 VDC

$ 260

Readouts

Style

Model / Power*

Add to Price above

NONE

Battery or 12-24VDC

$ 0

Basic LCD
Battery

$ 200

General Purpose LCD
Battery or 12-24VDC

$ 220

1/4 DIN In-Panel LCD
Battery or 12-24VDC

$ 200

1/8 DIN In-Panel LED
12-24 VDC

$ 280

Dual Input In-Panel LCD
12-24 VDC

$ 380

VDRO Software Readout
12-24 VDC**

$ 350

Encoder Cable Lengths

Encoder Cable Length

Readout Power

Add to Price above

12, 24, 72 or 120 Inches

Battery or 12-24VDC

$ 0

240 inches (6m)

Battery or 12-24VDC

$ 20

360 inches (9m)

Battery or 12-24VDC

$ 40

Configure & Purchase

* System and Readout Power must match.
** Software Readout requires 12-24VDC System and 700-1030-001 or 700-1039-001+700-1038-001

Each System comes with:

1 ABS Scale Measuring Range 10 in. Physical size: 14.25 inches or
1 ABS Scale Measuring Range 18 in. Physical size: 22.25 inches
1 Encoder (with selected cable length)
1 Digital Readout (if selected)
1 Pkg. Mounting Hardware containing:
- 1 Connector Link (for mounting and moving scale)
- 1 Mounting Screw (10-32 x 1/2" Pan Head Philips)
- 1 Guide Clip (for moving the encoder instead of the scale)
Installation and Operation Manuals

ProScale Model 150 Accessories

	ProRF Encoder Transmitter & Receiver: Instead of a long cable between the encoder and digital readout, this transmitter sends data wirelessly to a receiver connected to a remote Readout or a PC.	$420
	ProRF SPC Transmitter & Receiver: Transmits data from any readout with SPC output over a radio link to the ProRF Universal Receiver.	$470
	ProRF Universal Receiver: Receives data from up to 8 ProRF Encoders or ProRF SPC transmitters and outputs data to RS232 or USB.	$300
	ProMux-3 Provides RS232 communication from up to 3 Multiplexed Model 150 encoders (or SPC equipped readouts) to a PC or PLC.	$300
	SmartCable USB is a standard USB 2.0 Keyboard device allowing data to be input directly to an active application from a readout SPC output without the need for additional software.	$230
	GageWaySM - converts the SPC output from ProScale digital readouts to USB. With WedgeLink software data may may be parsed and redirected to an active PC software program.	$200
	Analog Interface Unit (AIU) is an interface designed to provide an analog signal output proportional to the current displayed position of the measurement system. 0-5 or 0-10 volt outputs are possible.	$205