| General Purpose Measuring Products: |
|
 |
ProScale
Model 150, absolute style encoder used for measurement up to 18 inches.
Can be used with or without a readout. Six readout models to
choose from. |
|
|
ProScale
Model 250, absolute style encoder used for general purpose measurement up to 240
inches. Can be used with or without a readout. Six readout
models to choose from. |
|
 |
Need a
2 axis measuring system?
Use any combination of Model 150 and Model 250 measuring systems
with the Dual Input Readout. |
|
 |
ProScale
Model 180,
incremental encoder used for measurement up to 18 inches. Can be
used with or without a readout. Four readout models to choose
from. |
|
 |
ProScale Model 280,
incremental encoder used for measurement up to 240 inches. Can
be used with or without a readout. Four readout models to choose
from. |
|
 |
ProScale Model 380,
incremental encoder used for measurement up to 120 inches. Can
be used with or without a readout. Four readout models to choose
from. |
|
 |
ProScale Model 580,
incremental encoder and linear bearing system used for measurement
and load bearing capacity, up to 192 inches. Can be used with or
without a readout. |
| Quality Control Products: |
 |
ProPanel
Classic,
a portable measuring system for making edge-to-edge, edge-to-hole, and
hole-to-hole measurements up to 1.2m (48 inches). SPC
output comes standard. |
|
 |
ProPanel-HD is
a portable measuring system for making outside and inside edge-to-edge
measurements up 96 inches. SPC
output comes standard. |
 |
ProTable
is a self contained, single axis measuring table/QC station with SPC output. Custom configurations are available in
one, two and three axis versions. |
| Products for the Woodworking Industry: |
 |
ProStop
is a complete digital stop and fence system for chop saws, radial arm saws,
and miter saws. |
 |
The
Planer-Sander Kit includes everything you need to add digital measuring
capability to your Wide Belt Sander or Industrial Planer. |
 |
ProKits
are custom engineered systems designed to retrofit table saws, vertical panel
saws, sliding table saws, and sanding machines. |
 |
ProStand
is a non-contact video measuring stand. It provides radial and axial
measurements and inspection of the cutting edges and grind quality on
cutterheads.
Optional items include ProTool software, a label printer for
cutterhead identification, an articulated arm (for holding a
laptop computer), and a custom designed mounting table. |
 |
ProTool
is a cutting tool calibration and cataloging software package. It
provides tooling measurement and cataloging when used with our
ProStand or a similar
system. |
|
|
ProSet
is specially designed
ProScale system for the top and outside heads of moulders. |
| Interfacing Products & Accessories: |
 |
ProRF Encoder
Transmitter:
Instead of a long cable between the encoder and digital readout,
this transmitter sends data by radio link to a receiver. |
 |
ProRF SPC Transmitter:
Transmits data from any SPC equipped ProScale readout over a
radio link to the ProRF Computer Receiver. |
 |
ProRF Computer Receiver:
Receives data from up to 8 ProRF Encoders or ProRF SPC
transmitters and converts the data to RS232 or USB. |
 |
ProMux
is an easy to use hardware interface that provides communication from
ProScaleABS
readheads (or SPC
equipped displays) to a user provided PC or PLC. ProMux is available in 3 or 8 input configurations, with RS232 or RS422 outputs. |
 |
The
Analog Interface Unit (AIU) is an interface designed to provide an analog
signal output proportional to the current displayed position of a ProScale
linear measurement system. |
 |
SPC
Converter
- converts SPC output from many of our digital readouts to serial or USB. |
| |
| Consumer Products....This
group contains various consumer level products. Generally, these are
products that are less accurate and have shorter warranty periods than our
commercial products. |
