ProTable XY 2x3

ProTable XY 2x3

In stock
SKU
901-5495-001
$4,800.00
Product or Custom Design Question

ProTable XY is a one or two-axis measuring system designed for panel or sheet type products up to 2 inches (50mm) thick and up to 120 lbs (55kg) evenly distributed weight.
The table surface is .375 inch (9.5mm) thick hard anodized cast aluminum plate (stainless steel optional) and each measuring axis is guided by a steel linear bearing system.
A back fence runs the entire length of each measuring axis and is constructed of .250 inch (6mm) stainless steel.
The moving measuring pins are made of hardened steel (stainless steel and custom, optional).
ProTables are built using quality aluminum extrusion and steel bearings to insure smooth operation and to minimize orthogonal, Abbé, and cosine errors.


Features:

  • Custom Design: These systems are built with your measuring requirements in mind. Our engineers collaborate with you via e-mail using 3D CAD drawings to ensure your idea is what we build and deliver.*

  • Battery Operation: One CR123 Lithium battery in each Readout (axis) will power a ProTable XY for up to 18 months.

  • Non-Linear error compensation: The ProTable XY Readout stores up to 126 calibration points along the entire measuring length of each axis.

  • Temperature compensation: The Readout samples ambient temperature every 15 minutes and applies applicable correction to the measurement.

  • SPC Output: Measurement data can be sent wirelessly to a PC.

  • Measurement Pins: Standard systems are supplied with hardened steel measuring pins, or Stainless steel may be ordered as an option. Custom Hole or Edge probes are also available.

  • Easy Operation: Readout settings for Zero, Plus & Minus Offsets, Data Send, and Measurement Units.

  • Choice of Measurement Units: The Readout will display measurements in inches to .001 or .0005; Millimeters to .01; or Centimeters to .01.

  • One year warranty on all parts against defects in workmanship.

  • RoHS compliant: Lead Free Product

  • Custom designs available for your measuring application

  • LCD Readout Manual

  • MADE IN USA






Specifications:
ProTable-2x3 25 x 30 inches (635 x 760mm) Better than  ± .005in  (± .13mm)
<iframe width="560" height="315" src="https://www.youtube.com/embed/zIEm31YB2F8" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Y and X axis measurement system. 25 inches x 30 inches (635 mm x 750 mm). Accuracy error not to exceed +/- .005 inches (.127 mm)

Write Your Own Review
You're reviewing:ProTable XY 2x3