ON SALE: Cabinet Saw Digital Readout Kits

DigiFence is a Digital Readout Kit for your Cabinet Saw Fence. This kit includes the digital scale, sensor, readout, and brackets. Don't see your fence type listed? We have dozens of other kits available; contact us for additional information.

Have a SAWSTOP Fence? Your fence is either made with angle steel that is 5/32" thickness or 1/4" thickness. Be sure to order the right kit based on how thick the angle steel is on your machine. See image here.

On Sale! Use coupon code DIGIFENCE100 to save $100 on your purchase.

In stock
SKU
DigiFence
$0.00
Product or Custom Design Question

DigiFence is a Digital Retrofit Kit for your existing cabinet saw rip fence.  Each system contains a digital measuring system, all the hardware needed to install DigiFence to your existing fence, installation instructions, and an operation manual. A typical DigiFence installation takes 35-45 minutes.

UPDATE: August 2020: These are now made with a newer readout model. More features, more customization, and twice the battery life!

NOTE: Be sure to order DigiFence to fit your FENCE brand, not your SAW model.


SAWSTOP OWNERS: THERE ARE 2 KITS TO CHOOSE FROM - BE SURE TO SELECT THE RIGHT ONE. Contact us if questions.


Features:

  • 52 inch Measuring Range (Note: We can supply a 36 inch range or a 60 inch range at same price, but shipping might cost more.)
  • Readout digits are very large - 0.5 inches (12.7 mm) tall!
  • Readings change from decimal inches, millimeters, or fractions (1/16, 1/32, 1/64) with a single button press
  • Easy to calibrate - start at zero or ANY preset starting position
  • Battery operation - 1 CR123 Lithium battery now lasts 18-24 months
  • Upgrades are available for ranges up to 120 inches
  • MADE IN THE USA since 1989

Specifications:

  • Accuracy: ± 0.005 inch
  • Repeatability: +/- 0.001 inch
  • Measuring Range: 36, 52, or 60 inches for the price shown. (52" is the default. If you want a different size, just let us know during checkout.)
  • 3 year warranty.

About lifting your fence off:

  • If you regularly lift your fence off the table, we have a HINGE KIT that allows the fence to be taken off in seconds, and reinstalled in seconds.
  • When used properly, this does not cause data loss or a need to re-calibrate.

About calibrating:

  • DigiFence can be calibrated two ways:
    1. Move fence against saw blade (machine power off).
      Press the DATUM on the readout.
      (This method is not recommended if you are after best possible accuracy.)
    2. Move fence close to the saw blade and lock it in place.
      Cut a small board, using same feed/speed as you normally do.
      Measure the cut board with best tool possible.
      Set this value into the digital readout using the PLUS and MINUS keys. 
      Why is this better? It accounts for any wobble, runout of your blade. It accounts for any vibration in your saw. It removes any questions about squareness of the fence to the blade.
      Simply put: It gets you the best accuracy possible!

About shipping costs:

  • Our website calculates shipping cost based on the product's weight only
  • In some cases, the length of our package can increase the shipping rate. NOTE: Our electronic scales are made in a single, rigid beam to ensure best possible accuracy and longest lifetime possible.
  • Shipping to residential addresses increases shipping cost with UPS.
  • When we receive and process your order, we hunt for the best rate possible, so shipping costs can sometimes be lower than the cart calculates. In this case, we refund the difference to you by mailed check.

INSTALLATION INSTRUCTIONS:

If your fence model is not listed, please contact us; new models are being engineered all the time!

OPERATION INSTRUCTIONS: NEW User Manual (for systems sold since August 2020)

Write Your Own Review
You're reviewing:ON SALE: Cabinet Saw Digital Readout Kits