ON SALE: Cabinet Saw Digital Readout Kits

DigiFence is a Digital Retrofit Kit for your existing Table Saw Fence. These kits include digital scales, sensors, readouts, and brackets to digitize your existing cabinet saw. Don't see your fence type listed? We have dozens of other kits available; contact us for additional information.

Have a SawStop Fence? Choose the right kit based on how thick the angle steel is on your machine. See image here.

On Sale! Use coupon code DIGIFENCE100 to save $100 on your purchase. (Sale extended to July!)

In stock
Product or Custom Design Question

DigiFence is a Digital Retrofit Kit for your existing non-sliding table saw rip fence.  Each system contains a digital measuring system, all the hardware needed to install the DigiFence to your existing rip fence, installation instructions and operation manual. A typical DigiFence installation takes 35-45 minutes.

NOTE: Be sure to order DigiFence to fit your FENCE brand, not your SAW model.


  • 52 inch Measuring Range (we can supply a 60 inch range at same price, but shipping costs more)
  • Readout digits are .5 inches (12.7 mm) in height.
  • Readout displays decimal inches, millimeters, or fractions (1/16, 1/32, 1/64)
  • Absolute and Incremental readings at the push of a button
  • Easy to calibrate - start at zero OR any preset starting position
  • Battery operation - 1 CR123 Lithium battery last 6-8 months
  • Upgrades available for 96 inch fences


  • Accuracy: ± 0.010 inch
  • Repeatability: +/- 0.001 inch
  • Measuring Range: 36, 52, or 60 inches. (52" is the default. If you want a different size, just let us know during checkout)
  • 1 year warranty.

About lifting your fence off:

  • If you regularly lift your fence off the table, we have a HINGE KIT that allows the fence to be taken off in seconds, and reinstalled in seconds.
  • When used properly, this does not cause data loss or a need to re-calibrate.
  • Photos and video coming soon!

About calibrating:

  • DigiFence can be calibrated two ways:
    1. Move fence against saw blade (machine power off).
      Press the DATUM on the readout.
      (This method is not recommended if you are after best possible accuracy.)
    2. Move fence close to the saw blade and lock it in place.
      Cut a small board, using same feed/speed as you normally do.
      Measure the cut board with best tool possible.
      Set this value into the digital readout using the PLUS/MINUS keys. 
      Why is this better? It accounts for any wobble, runout of your blade. It accounts for any vibration in your saw. It removes any questions about squareness of the fence to the blade.
      Simply put: It gets you the best accuracy possible!

About shipping costs:

  • Our website calculates shipping cost based on the product's weight only
  • In some cases, the length of our package can increase the shipping rate. NOTE: Our electronic scales are made in a single, rigid beam - to ensure best possible accuracy.
  • Shipping to residential addresses will increase shipping cost, especially with UPS.
  • When we receive and process your order, we hunt for the best rate possible, so shipping costs can sometimes be lower than the cart calculates. In this case, we refund the difference to you.
  • If you prefer to use your shipping account, please phone your order in to us.
Write Your Own Review
You're reviewing:ON SALE: Cabinet Saw Digital Readout Kits