ProPanel: Giant Caliper
ProPanel-HD is a precision hand-held measuring tool built and used like a caliper to make inside, outside, diagonal, hole-edge and hole-hole dimensional measurements.
ProPanel-HD is a giant digital caliper used to make inside, outside, diagonal, hole-edge, and hole-hole dimensional measurements.
This is a rugged linear measuring tool and is designed to make "on the manufacturing floor" measurements by one or two operators.
It is based on the ProScale Model 590 and is robust enough to span up to 120 inches of measuring range. It has a sliding carriage/jaw assembly that rides on 4 iGlide™ friction bearings to minimize encoder pitch and yaw. Four removable alignment pins (shown in picture above) are included with the system for easy diagonal measurements. The optional Hole Measuring Kit containing 2 full and 1 half steel cones is available for hole measurements.
- Battery Operation: 1 CR123 Lithium battery lasts up to 6-8 months
- LCD Readout: Low power LCD with Auto Off/On
- Large, easy-to-read: .50 in (12.7 mm) characters
- Displays: decimal inches, fractions, millimeters, or centimeters
- Five Operation Keys: Power, Units, Datum, Plus, Minus
- Six Function Keys: ABS/INC, Data SEND, and 4 special function keys
- Programmable Datum: use Datum key for zero or other value
- Special Functions: Go/NoGo, Upper/Lower limit, Sum, Min, Max, Ave.
- Scaling: Programmable Linear scaling factor
- Lock-Out: Front panel keys and Readout programming
- ProRF: Wireless Data Transmitter ready
- MADE IN THE USA
|Accuracy||± .005in (.13mm) maximum error over measuring range-all models|
|Display Range||± 999.999in or ± 9999.99mm or ± 999.999cm or ± 399 63/64|
|Resolution||.001in or .01mm or .001cm or 1/64 in|
|Repeatability||.001in or .01mm or .001cm or 1/64 in|
|Operating Power||1 CR123 Lithium Battery or equivalent|