ProScale 590 Incremental Linear Encoder with Bearing System

Model 590 is a linear encoder with a fixed gap on the encoder. Measuring ranges up to 16 feet (4.9m) in a single piece (much longer in sections). High slew rate, ultra-low power consumption, and high EMI immunity make this incremental encoder an good fit for most machinery and gaging applications. Four stock digital readout options are available. (Works with battery or external power.)

In stock
As low as $720.00
Product or Custom Design Question
ProScale Model 590 use inductive incremental measuring technology.
These encoders require a constant power source to maintain their position.
This system is used in a 'Scale Stationary, Encoder Moving' configuration.
The speed of inductive incremental encoders is limited to approximately 70 inches per second.

Light duty linear friction bearing system with integrated inductive encoder.

No Gap to Set: All Encoders are "captive" on the Scale so you never need to set the Encoder gap.

Battery or 24 VDC Operation.

High Noise Immunity: Electrical noise, magnetic fields, or power transients affecting the measurement accuracy or signal integrity is rare.

Scalability: The 590 supports multiple Encoders and Readouts operating simultaneously on the same Scale.

Wireless Data: Systems are available with 2 way ProRF-SPC or Encoder wireless data transmitters.

Encoder Speed: up to 70 inches per second.

RoHS compliant Lead Free Product

MADE IN USA Each ProScale Model 590 System Includes:
1 Inductive Incremental Measuring Scale - Measuring Range + 8 inches = Physical length
1 Inductive Incremental Encoder (with selected cable length)
1 Digital Readout (if selected)
1 Pkg. Mounting Hardware containing
Mounting Screws
Quick Start Installation and Operation Manuals
User Manual User Manual User Manual
Installation Manual Operation Manual Information Sheet
User Manual
2D Drawing
Write Your Own Review
You're reviewing:ProScale 590 Incremental Linear Encoder with Bearing System