ProScale 950 Series LCD Readout, *10-pin input*

The 950 Series Readout works with current Accurate Technology ProScale ABS (Model 150 and 250) Encoder Systems as well as older Mitutoyo ProScale branded 950 Series 404, 405, 406 & 407 Systems. This Readout requires a special 10 pin Encoder connection.  The 950 Readout has the same feature set as the ProScale General Purpose Enhanced Readout, except the 950 does not support 12-24VDC operation or programmable output signal.

In stock
SKU
700-1600-M50
$240.00
Product or Custom Design Question

The 950 Series Readout works with current Accurate Technology ProScale ABS (Model 150 and 250) Encoder Systems as well as older Mitutoyo ProScale branded 950 Series 404, 405, 406 & 407 Systems.  This Readout requires a special 10 pin Encoder connection.  The 950 Readout has the same feature set as the ProScale General Purpose Enhanced Readout, except the 950 does not support 12-24VDC operation or programmable output signal.


Features:

  • Battery Operation: 1 CR123 Lithium battery lasts up to 12 months
  • LCD Readout: Low power LCD with Auto Off/On
  • Large, easy-to-read: .75 in (20mm) characters
  • Displays: decimal inches, fractions, millimeters, or centimeters
  • Five Operation Keys: Power, Units, Datum, Plus, Minus
  • Six Function Keys: ABS/INC measurements, Data SEND, and 4 special function keys
  • ProRF: Wireless Data Transmitter ready
  • Easy mounting: from behind or through case.
  • Programmable Datum: use Datum key for zero or other value.
  • Special Functions: Go/NoGo, Upper/Lower limit, measurement Sum, Min, Max, Ave.
  • Scaling: Programmable Linear scaling factor.
  • Compensation: Non-Linear and Temperature Compensation
  • Lock-Out: Front panel keys and Readout programming
  • RoHS compliant:  Lead Free Product
  • MADE IN USA


Specifications:

fractions inch mm cm
Display Range ± 399 63/64 ± 999.999 ± 9999.99 ± 999.999
Resolution 1/16, 1/32 or 1/64 .1, .01 or .001 .1 or .01 .1, .01 or .001
Repeatability 1/64 .001 .01 .001
Operating Power 1 CR123 Battery  (or equivalent) or 12-24 VDC
Output  SPC (Digimatic®)
Dimensions 4.5 x 3.5 x 1.5 in. (115 x 90 x 40 mm)
Current Part Number  700-1600-M50
Current Firmware version 3.2xx
User Manual Quick Start Manual
Full User Manual Quick Start Manual
User Manual
2D Drawing
User Manual Quick Start Manual
3D STEP 3D IGES
Write Your Own Review
You're reviewing:ProScale 950 Series LCD Readout, *10-pin input*