Skip to the beginning of the images gallery

General Purpose Enhanced, V4

The newest version General Purpose Enhanced Readout has the same full feature set of programmable options and functions as the General Purpose Readout:
Single button operation for Absolute vs Incremental measurements, Data Send, Offsets, and built-in functions like Upper/Lower Limit and Go/NoGo measurements. It has an external connector for DC power in, Programmable Signal out, and External Key input.
The General Purpose Enhanced Readout adds a 126 point Non-Linear Error Compensation table plus automatic Temperature Compensation for the best accuracy under various operating environments.
The General Purpose Enhanced Readout operates on 1 CR123 Lithium battery, or 12-24VDC. SPC (Digimatic) output is standard and it is ready for a ProRF wireless transmitter.

If you are ordering this readout as a replacement for an existing readout, it WILL NOT come pre-programmed with compensation data in place. Your gage will need to be recertified immediately after this readout is installed. If you have questions about this, contact factory before placing your order.

In stock

SKU

700-1600-246

$254.00

Product or Custom Design Question

Details

The General Purpose Enhanced Readout has the same full feature set of programmable options and functions as the General Purpose Readout:
Single button operation for Absolute vs Incremental measurements, Data Send, Offsets, and built-in functions like Upper/Lower Limit and Go/NoGo measurements. It has an (optional) external connector for DC power in, Programmable Signal out, and External Key input.

The General Purpose Enhanced Readout adds a 126 point Non-Linear Error Compensation table, plus automatic Temperature Compensation for the best accuracy under various operating environments.
The General Purpose Enhanced Readout operates on 1 CR123 Lithium battery or (optionally) 12-24VDC. SPC (Digimatic) output is standard and it is ready for a ProRF wireless transmitter.

Features:

Battery Operation: 1 CR123 Lithium battery lasts up to 12 months
DC Operation: 12-24 VDC (now with battery backup)
LCD Readout: Low power LCD with Auto Off/On
Large, easy-to-read: .75 in (20mm) characters
Displays: decimal inches, fractions, millimeters, or centimeters
Five Primary Operation Keys: Power, Units, Datum, Plus, Minus
Six Secondary Function Keys: ABS/INC, SEND, and 4 special function keys
ProRF: Wireless Data Transmitter ready
Easy mounting: from behind or through case.
Programmable Datum: use Datum key for zero or any other value.
Special Functions: Go/NoGo, Upper/Lower limit, Position Monitor, Hold measurement, kerf compensation
Scaling: Programmable Linear scaling factor.
Compensation: Non-Linear and Temperature Compensation
Lock-Out: You can independently lock out front panel keys and/or Readout programming
RoHS compliant: Lead Free Product
MADE IN USA

Specifications:

	fractions	inch	mm	cm
Display Range	± 399 63/64	± 999.999	± 9999.99	± 999.999
Resolution	1/16, 1/32 or 1/64	.1, .01 or .001	.1 or .01	.1, .01 or .001
Repeatability	1/64	.001	.01	.001
Operating Power	1 CR123 Battery (or equivalent) or 12-24 VDC
Output	SPC (Digimatic®) and a programmable open collector signal
Dimensions	4.5 x 3.5 x 1.5 in. (115 x 90 x 40 mm)
Current Part Number	700-1600-246
Current Firmware version	4.100